Daylight

Daylight

Daylight

An intimate and cosy alcove for indulging in the open-air life inspires the shapes of the outdoor seating system Daylight. With a distinctive identity, each single element can live independently, as a living centrepiece, thanks to the design of its base raised by four cylindrical teak feet, or can develop into flexible configurations.

In a clever interplay of lines, the curved frame of backrests and armrests is reminiscent of a vibrant, enveloping fan. Available with two different seat depths, Daylight also features individual elements such as a sofa, round armchair, loveseat and sunlounger, which can be combined in multiple solutions, ideal for creating contemporary open-air oases. 

A design that immediately conveys a sensation of relaxation, offering the same comfort and appeal of the indoor furnishing proposals.

The same concept also inspires the design of a family of coffee tables with cylindrical legs and a natural teak frame housing an embedded top in Ceppo di Gré® - a natural ornamental stone typical of Lombard architecture. The legs are embellished with fine details in Bronze-coloured varnished aluminium, while the top enhances the materiality and neutral shades of the stone, making these pieces perfect for furnishing outdoor domestic landscapes. 

In a clever interplay of lines, the curved frame of backrests and armrests is reminiscent of a vibrant, enveloping fan.

Technical Features

Armchair 77x74 cm
Armchair 96x94 cm
Loveseat 168x164 cm
Sofa 216x109 cm
Corner element 109x109 cm
Element with 1 armrest 209x109 cm
Element with 1 armrest with TOP 209x109 cm
Open-end element with armrest 209x109 cm
Central element 102x109 cm
Central element 202x109 cm
Central element with TOP 202x109 cm
Open-end element 202x109 cm
Ottoman 102x102 cm
Ottoman 202x102 cm
Ottoman with TOP 202x102 cm
Sofa 216x89 cm
Element with 1 armrest 109x89 cm
Element with 1 armrest 209x89 cm
Element with 1 armrest with TOP 209x89 cm
Open-end element with armrest 209x89 cm
Central element 102x89 cm
Central element 202x89 cm
Central element with TOP 202x89 cm
Open-end element 202x89 cm
Ottoman 102x82 cm
Ottoman 202x82 cm
Ottoman with TOP 202x82 cm
Daybed with reclining backrest 205 cm
Optional backrest cushion 75x50 cm
Optional backrest cushion 65x50 cm
Optional cushion 50x50 cm
Optional cushion 45x40 cm
Optional cushion 45x40 cm - with band
Coffee table 60x63xh40 cm
Coffee table 100x103xh28 cm
Coffee table 82x82xh14 cm
Coffee table 102x82xh14 cm
Coffee table 102x102xh14 cm
Coffee table 102x102xh28 cm
Structure
Upper frame in tubular stainless steel with Bronze colour epoxy powder-coat and glossy anti-fingerprint finish. The steel structure is clad in woven Taslan (air-jet weaving and texturizing process) 6 mm Ø polypropylene cord. The cord is available in Blue, Moss, Rust, Sand, Teak or Dark Brown colour. Near where the upper frame is coupled to the wood base, there are varnished polished Bronze colour aluminium anchors, with DELRIN® spacers.
Cushions
Seat and backrest cushions in high-resilience polyurethane foam and eco-friendly, water-repellent fibre. In order to better protect the padding from water and humidity, all the cushions are encased in water-repellent polyester slipcovers. All the accessories - zippers, thread - are water-repellent and therefore appropriate for outdoor use.
Covers
Seat and backrest cushion slipcovers are completely removable.
Base
Weight-bearing, 40 mm thick, in solid teak (Tectona Grandis - First European Quality), natural finish, kiln-dried. Crafted on CNC machines, assembled at 45° with finger joints reinforced with dowel pins. Metal underframe, exterior grade varnish finish. Woven elastic webbing for outdoor use in UV-resistant synthetic rubber and polypropylene.
Feet
Rests on tubular stainless-steel feet, vanished Bronze colour, clad in teak (Tectona Grandis - First European Quality), with natural finish. At the end of each foot there are decorative elements in aluminium varnished Bronze colour with glossy anti-fingerprint finish. Adjustable feet and black protective SEBS glides.
ARMCHAIR 77 CM AND 96 CM / LOVESEAT


Base: weight-bearing, composed of a frame in solid teak (Tectona Grandis - First European Quality) with natural finish, 40 mm thick, and a circular stainless-steel base with Bronze colour epoxy powder-coat and glossy anti-fingerprint finish. Underframe frame in teak slats (Tectona Grandis - First European Quality), natural finish. The teak is kiln-dried. Crafted on CNC machines and assembled with dowel joinery and glue. Rests on rigid castors in polyamide with thermoplastic polyurethane strip and stainless-steel support. The castors allow the element to swivel 360°.
DAYBED WITH RECLINING BACKREST


Structure: in solid teak (Tectona Grandis - First European Quality), 40 mm thick, natural finish, kiln-dried. Crafted on CNC machines, assembled at 45° with finger joints reinforced with dowel pins. Frame in stainless steel, varnished polished Bronze colour with anti-fingerprint finish, upholstered with Batyline fabric. Backrest reclinable to several heights with snap-in movement and Dove Grey Melange polypropylene cord attached to the structure.

Feet: rests on tubular stainless-steel feet, vanished Bronze colour, clad in teak (Tectona Grandis - First European Quality), with natural finish. At the end of each foot there are decorative elements in aluminium varnished Bronze colour with glossy anti-fingerprint finish. Adjustable feet and black protective SEBS glides.

Wheels: in teak, (Tectona Grandis - First European Quality), natural finish with protective black rubber ring attached to the wheels.
COFFEE TABLES AND TABLE-TOPS


Top: Ceppo di Gré ® stone, 15 mm thick, filled and honed. Underpanel in black HPL, 10 mm thick. The stone top is treated for stain resistance, but this does not ensure total protection.

Structure: loadbearing, in solid teak (Tectona Grandis - First European Quality), natural finish, kiln-dried. Crafted on CNC machines, assembled at 45° with finger joints reinforced with dowel pins. The legs contain internal tubular stainless steel, varnished black. At the end of each leg there are decorative ferrules in aluminium varnished polished Bronze colour with anti-fingerprint finish. Adjustable ABS feet.

2d files

The dimensions shown in the CAD files could differ slightly from those indicated on the product sheet. N.B.: the CAD files available on our website are copyright-protected and are proprietary to Minotti SpA. The company authorizes their use exclusively for interior design purposes. Any other use is strictly prohibited.

3d files

The dimensions shown in the CAD files could differ slightly from those indicated on the product sheet. N.B.: the CAD files available on our website are copyright-protected and are proprietary to Minotti SpA. The company authorizes their use exclusively for interior design purposes. Any other use is strictly prohibited.

WARNING
All designs and models of the 2024 collection are owned by Minotti s.p.a. and have been registered in the European Union and China on April 12th 2024. All related rights are exclusively reserved to Minotti s.p.a., worldwide.
Therefore, Minotti s.p.a. will have the right to take legal action, in any jurisdiction, against any counterfeiting case and violation of its intellectual property rights.

Download immagine bassa risoluzione

The images available on our website are copyright-protected and are proprietary to Minotti SpA.
Any modification, even in part, is expressly prohibited.
By downloading the selected image, you confirm you have read and accepted the terms and conditions in the Intellectual and industrial property rights

All the contents of the Website shall be deemed to be protected and safeguarded by current provisions concerning copyright and intellectual and industrial property rights.
The material available on the Website may not be extracted or reused, reproduced in full or in part, distributed, published or transmitted, without the prior express written consent of MINOTTI. Any other activities that may be prejudicial to the legitimate interests of the authors and holders of rights concerning the original works and decorative models accessible thereon are forbidden. 
In addition to section 2 above, Website contents include, without limitation, any texts, photographs, filmed sequences and presentations, databanks, charts and tables, slogans, audio and video reproductions as well as any graphic and/or text representations in general. 
All the trademarks, domain names, corporate names, business names and marks available on the Website shall be the sole property of MINOTTI and are thus protected by current provisions concerning hallmarks. Therefore, it is absolutely forbidden to reproduce the said names and marks, in any form or manner, without the prior express written consent of MINOTTI, nor may the trademark “MINOTTI” be registered in any top level domain.
The pages of the Website might contain trademarks, domain names, corporate names, business names and marks owned by third parties, with whom MINOTTI co-operates in different capacities; the said names and marks shall be protected by current provisions concerning copyright and intellectual and industrial property rights, just like the hallmarks of MINOTTI.
Finally, MINOTTI hereby informs that it is absolutely forbidden to use any and all hallmarks owned by MINOTTI as metatags – that is, any HTML element which does not involve displaying or formatting a certain control, while providing electronic agents or search engines with instructions, to increase the availability of any website other than the websites connected with MINOTTI.

Website Contents
The Internet site www.minotti.com is an on-line information portal which brings the user up-to-date about Minotti and the products and services of Minotti, with a view to providing an overview of the main lines of business, products and services of MINOTTI.
All the contents of the Website (including, without limitation, news, images, video photographs, sounds, trademarks, logos, domain names, application software, graphic layouts, technical documentation, manuals and presentations) and the rights related thereto shall be deemed to be reserved; therefore, the said contents may only be consulted for personal information, any other use being expressly forbidden without the prior written consent of MINOTTI.
MINOTTI and the managers, directors, partners and/or employees of MINOTTI do not provide any guarantee as to the functionality of the Website, and the accuracy and completeness of the contents published on the Website; in addition, MINOTTI hereby reserves the right to modify and update the said information without notice at any time, at the sole discretion of MINOTTI.
In no event may MINOTTI or the managers, administrators, partners and/or employees of MINOTTI be held responsible, in any capacity and for any reason, for the functionality of the Website or for any damage arising from the use of, or failure to use, the Website and contents thereof, or from omissions, inaccuracies or mistakes in the contents of the Website.
The software programmes related to the Website and the Website might malfunction and contain some viruses or any other harmful elements. Hence the user of the Website and contents thereof hereby takes full and unconditional responsibility for any loss, damage and cost that might result for the user from the use of the Website.

Website Use
The contents of the Website may not – whether in full or in part – be copied, reproduced, republished, uploaded, transcribed, transmitted or distributed, in any manner or form, without the prior written consent of MINOTTI. In addition, the contents of the Website may not be disclosed – whether in full or in part – through communication channels, e.g. the Internet, TV systems, radio systems or any other systems, without the prior written consent of MINOTTI. 
Furthermore, the information and material available on the Website may not be used for commercial purposes with a view to creating databanks varying in type, nor may the said information and material be stored (whether in full or in part) in pre-existing databanks, whether accessible only to the creator or made available to third parties.

Linking and Framing
No links to the home page of the Website currently available at the web address http://www.minotti.com/ or to any other internal page of the Website may be created without the prior written consent of MINOTTI.
Any specific links that do not refer the user to an internal page via the home page of the Website currently available at the web address http://www.minotti.com/ (“deep linking”) are hereby expressly forbidden; automatic input links (“inline linking”), which allow the user to automatically display images from the Website in a specific space are not allowed either.
“Framing links”, which allow a page of the Website to be displayed on a certain page of another website, while making sure that the contents of the said page are displayed in a dedicated frame, instead of being shown in an independent window of the surfing browser, are also forbidden.
In this respect, it should be pointed out that failure to comply with the provisions of this section may be prosecuted in relation, for example, to unfair competition, as governed by current relevant provisions.

Modification
These terms of use may be modified by MINOTTI without notice at any time, provided that the users periodically examine the said terms of use before accessing the contents of the Website. 

Applicable Law and Place of Jurisdiction
These terms of use shall be governed by and construed in accordance with the Italian law.
Subject to the foregoing, any controversy arising out of or relating to the use of this Website, with specific reference to these terms of use, shall be settled by the Court of Milan.
Since these terms of use shall be construed in accordance with the laws of Italy, in the event of any disagreement in the interpretation of these terms of use between the Italian version and the English version, the Italian version shall prevail.

CONFERMO E PROCEDO