Dylan Small

Dylan Small

Dylan Small

El riguroso y acogedor sistema de asientos modulares Dylan también está disponible en una versión con una profundidad de asiento más compacta. Nace Dylan Small, un sistema que combina la sofisticada estética de sus cojines con la ligereza de una base contemporánea elevada a 13,5 cm del suelo. Los volúmenes tapizados son de profundidad reducida, lo que permite a Dylan Small encajar perfectamente incluso en espacios domésticos o de hostelería más pequeños. 

El proyecto expresa el equilibrio perfecto entre la esencialidad del diseño y la densidad de los refinados detalles con sabor a alta costura, como los sofisticados pespuntes y la sinuosa curva que delinea los respaldos y los apoyabrazos.

Dylan Small retoma la compleja construcción de la base suspendida de Dylan, en la que tiras de cuero o tela se cosen entre sí mediante ribetes y están salpicadas de costuras que dan ritmo al acolchado del asiento.

En un volumen compacto y versátil toda la capacidad de fabricación de los 75 años de herencia de Minotti.

El proyecto expresa el equilibrio perfecto entre la esencialidad del diseño y la densidad de los refinados detalles con sabor a alta costura.

Technical Features

SMALL - Sofa cm 174
SMALL - Sofa cm 241
SMALL - Element with 1 armrest cm 154
SMALL - Element with 1 armrest cm 221
SMALL - Element with 1 armrest cm 221 with TOP H cm 63x83
SMALL - Open-end element with armrest cm 221
SMALL - Inclined element with armrest cm 182x129
SMALL - Inclined sofa cm 187x125
SMALL - Inclined sofa cm 277x125
SMALL - Inclined sofa cm 246x125
SMALL - Inclined element with armrest cm 190x125
Optional cushion cm 50x50
Structure
Seat in metal-reinforced plywood. The seat structure is padded with high-resilience, variable-density polyurethane foam with high-rubber-content elastic webbing to maximize comfort. The plywood armrest and backrest structures are covered in high-resilience, variable-density polyurethane foam, then encased in breathable heat-bonded polyester quilted fibre laminated to white cotton fabric. All of the materials employed in manufacturing the quilting are hypoallergenic and made with recycled materials. Tailoring of the backrest/armrest structure upholstery and of the seat cushions is distinguished by piping and couture-inspired soft top-stitching that convey an immediate sense of comfort, thanks to the slight curve of the backrest and armrest. To increase fluffiness, the backrest and armrest upholstery has quilting that joins the thick heat-bonded fibre encased in white cotton fabric to the upholstery. The structural base is sheathed in strips of fabric or leather, tailored using the same techniques used in the Connery seating system, stitched together using laces embellished with fine hand-finished stitching.
Table-top surfaces
The element with 1 armrest cm 221 with TOP H has a top laminated MDF and aluminium, 18 mm thick, in ash veneer with open pore Moka colour lacquer finish or open-pore Tobacco colour stain.
It is not possible to make the base of this product using the following fabrics: Velvet, Gary, Hunt, Kabuki, Kerlin, Leopold, Tibet Square, Timothy.
Cushions
Seat cushions, padded in high-loft channelled goose down to lend greater softness and increase comfort, undergo routine sanitization as specified in EC Regulation No. 1069/2009 (Assopiuma certified, Gold Label). They are then encased in breathable heat-bonded fibre laminated to white hypoallergenic cotton fabric. Seat cushions with high resilience, variable-density polyurethane foam insert are covered in the upper part with temperature-sensitive polyurethane material.
Covers
Upholstery for the structure and seat cushions is completely removable in all versions (fabric and leather).
INFORMATIONS REGARDING UPHOLSTERY AND COVERS
A) All-fabric or all-leather upholstery;
B) base upholstered in cat. Nature Leather, seat and backrest cushions in fabric.
Bases
Weight-bearing, in extruded aluminium with varnished polished anti-fingerprint Bronze or Pewter colour finish. Bronze or black colour protective polyethylene glides to match the base finish.
For removal of upholstery, the backrest/armrest elements and table-top (where included) can easily be lifted out by releasing he levers located underneath the support structure. If needed, this operation can also be used to facilitate shipping and delivery.

Modelos 2D

Las dimensiones indicadas en los archivos CAD pueden variar ligeramente respecto a las medidas que figuran en la ficha de producto. N.B.: los archivos CAD presentes en el sitio web están protegidos por derechos de autor y son propiedad exclusiva de Minotti SpA. La empresa solamente autoriza su uso en el ámbito del diseño de interiores. Se prohíbe terminantemente cualquier otro uso

DYLAN_SMALL.DWG

Modelos 3D

Las dimensiones indicadas en los archivos CAD pueden variar ligeramente respecto a las medidas que figuran en la ficha de producto. N.B.: los archivos CAD presentes en el sitio web están protegidos por derechos de autor y son propiedad exclusiva de Minotti SpA. La empresa solamente autoriza su uso en el ámbito del diseño de interiores. Se prohíbe terminantemente cualquier otro uso

WARNING
Todos los diseños y modelos de la colección 2023 son propiedad de Minotti s.p.a. y fueron registrados en la Unión Europea y en China el 12 de abril de 2023.
Todos los derechos internacionales sobre los mismos están reservados exclusivamente a Minotti s.p.a. que tendrá derecho a emprender acciones legales, en cualquier jurisdicción, contra cualquier caso de infracción o violación de sus derechos de propiedad intelectual.

Download immagine bassa risoluzione

Las imágenes presentes en el sitio web están protegidas por derechos de autor y son propiedad exclusiva de Minotti SpA.
Se prohíbe expresamente cualquier modificación de las mismas, aunque sea parcial.
Al descargar la imagen seleccionada confirmas que has leído y aceptado los Derechos de propiedad intelectual e industrial

All the contents of the Website shall be deemed to be protected and safeguarded by current provisions concerning copyright and intellectual and industrial property rights.
The material available on the Website may not be extracted or reused, reproduced in full or in part, distributed, published or transmitted, without the prior express written consent of MINOTTI. Any other activities that may be prejudicial to the legitimate interests of the authors and holders of rights concerning the original works and decorative models accessible thereon are forbidden. 
In addition to section 2 above, Website contents include, without limitation, any texts, photographs, filmed sequences and presentations, databanks, charts and tables, slogans, audio and video reproductions as well as any graphic and/or text representations in general. 
All the trademarks, domain names, corporate names, business names and marks available on the Website shall be the sole property of MINOTTI and are thus protected by current provisions concerning hallmarks. Therefore, it is absolutely forbidden to reproduce the said names and marks, in any form or manner, without the prior express written consent of MINOTTI, nor may the trademark “MINOTTI” be registered in any top level domain.
The pages of the Website might contain trademarks, domain names, corporate names, business names and marks owned by third parties, with whom MINOTTI co-operates in different capacities; the said names and marks shall be protected by current provisions concerning copyright and intellectual and industrial property rights, just like the hallmarks of MINOTTI.
Finally, MINOTTI hereby informs that it is absolutely forbidden to use any and all hallmarks owned by MINOTTI as metatags – that is, any HTML element which does not involve displaying or formatting a certain control, while providing electronic agents or search engines with instructions, to increase the availability of any website other than the websites connected with MINOTTI.

Website Contents
The Internet site www.minotti.com is an on-line information portal which brings the user up-to-date about Minotti and the products and services of Minotti, with a view to providing an overview of the main lines of business, products and services of MINOTTI.
All the contents of the Website (including, without limitation, news, images, video photographs, sounds, trademarks, logos, domain names, application software, graphic layouts, technical documentation, manuals and presentations) and the rights related thereto shall be deemed to be reserved; therefore, the said contents may only be consulted for personal information, any other use being expressly forbidden without the prior written consent of MINOTTI.
MINOTTI and the managers, directors, partners and/or employees of MINOTTI do not provide any guarantee as to the functionality of the Website, and the accuracy and completeness of the contents published on the Website; in addition, MINOTTI hereby reserves the right to modify and update the said information without notice at any time, at the sole discretion of MINOTTI.
In no event may MINOTTI or the managers, administrators, partners and/or employees of MINOTTI be held responsible, in any capacity and for any reason, for the functionality of the Website or for any damage arising from the use of, or failure to use, the Website and contents thereof, or from omissions, inaccuracies or mistakes in the contents of the Website.
The software programmes related to the Website and the Website might malfunction and contain some viruses or any other harmful elements. Hence the user of the Website and contents thereof hereby takes full and unconditional responsibility for any loss, damage and cost that might result for the user from the use of the Website.

Website Use
The contents of the Website may not – whether in full or in part – be copied, reproduced, republished, uploaded, transcribed, transmitted or distributed, in any manner or form, without the prior written consent of MINOTTI. In addition, the contents of the Website may not be disclosed – whether in full or in part – through communication channels, e.g. the Internet, TV systems, radio systems or any other systems, without the prior written consent of MINOTTI. 
Furthermore, the information and material available on the Website may not be used for commercial purposes with a view to creating databanks varying in type, nor may the said information and material be stored (whether in full or in part) in pre-existing databanks, whether accessible only to the creator or made available to third parties.

Linking and Framing
No links to the home page of the Website currently available at the web address http://www.minotti.com/ or to any other internal page of the Website may be created without the prior written consent of MINOTTI.
Any specific links that do not refer the user to an internal page via the home page of the Website currently available at the web address http://www.minotti.com/ (“deep linking”) are hereby expressly forbidden; automatic input links (“inline linking”), which allow the user to automatically display images from the Website in a specific space are not allowed either.
“Framing links”, which allow a page of the Website to be displayed on a certain page of another website, while making sure that the contents of the said page are displayed in a dedicated frame, instead of being shown in an independent window of the surfing browser, are also forbidden.
In this respect, it should be pointed out that failure to comply with the provisions of this section may be prosecuted in relation, for example, to unfair competition, as governed by current relevant provisions.

Modification
These terms of use may be modified by MINOTTI without notice at any time, provided that the users periodically examine the said terms of use before accessing the contents of the Website. 

Applicable Law and Place of Jurisdiction
These terms of use shall be governed by and construed in accordance with the Italian law.
Subject to the foregoing, any controversy arising out of or relating to the use of this Website, with specific reference to these terms of use, shall be settled by the Court of Milan.
Since these terms of use shall be construed in accordance with the laws of Italy, in the event of any disagreement in the interpretation of these terms of use between the Italian version and the English version, the Italian version shall prevail.

CONFERMO E PROCEDO